How to wear Santai Magnetic Eyelashes?

EN · BM captions

How to apply

Easier than mascara.

Thirty seconds, no glue, no commitment. Press play.

01

Place at the lash line

Hold the band a hair above your natural lashes. The magnets guide themselves home — you don't have to aim.

02

Press from the inner corner

Pinch gently inward, then outward. The strip seats itself along the lash line in one motion.

03

That's it

No glue. No drying. No commitment. Lift off cleanly at the end of the night.

Common mistakes

Honest fixes.

Mistake

Strip lifting at the corner.

Fix

You placed it too low. Lift, raise 1mm, the magnets re-seat.

Mistake

Looks too dramatic in daylight.

Fix

Try Inbox or Minutes — same band, lighter fibre.

Mistake

Gap between band and lash line.

Fix

Apply your magnetic liner first, fully dry, then the lash.

Mistake

Hard to remove.

Fix

Slide a fingertip along the band. They lift off in one piece.

First-timer checklist

Five minutes. A mirror at eye level.

01Take five minutes — the first time only. After that, thirty seconds.
02Mirror at eye level. Looking down hides the lash line.
03Apply magnetic liner first. Let it dry fully before the lash.
04Press from the inside corner outward, never the middle first.
05If it doesn't sit right, lift and replace. The magnets are forgiving.

Real first attempts

Customers, on camera.

▶

Ready to try?

Your match in 60 seconds.

Browse the collection

Separate

After opening the lash case, take out a single lash strip and gently separate it from the end into two parts.

Identify

Locate the blue and white dots on the lash band: the right dot indicates the right-eye lash, and the left dot indicates the left-eye lash.

Attach

Place the blue dot on the “UP” position and the white dot on the “DOWN” position.

Clamp

Align closely with your lash line and gently press to close the lashes.

Take out and separate lash strips

Locate the blue and white dots

Place the blue dot on "up“ ，white dot on "down"

Apply lash glue before clamping

Allign closely with lashline and clamp on lashes

Frequently asked questions

Using the magnetic applicator, place your natural lashes between the top and bottom lash strips. The magnets lock together for a secure hold.

This design eliminates glue, making the process safer, cleaner, and more comfortable.

Afterhours:

Width 23mm

Length 8mm–10m

Inbox:

Width 23mm

Length 8mm–10.5mm

Pitch:

Width 23mm

Length 9.5mm–11mm

Minutes:

Width 23mm

Length 9.5mm–11mm

Boardroom:

Width 23mm

Length 9mm–11mm

Nightshift:

Width 23mm

Length 9.5mm–13mm

Twilight:

Width 23mm

Length 8.5mm–11mm

Kickoff:

Width 23mm

Length 8.5mm–10.5mm

1 Lash Storage Case

1 Magnetic Lash Applicator

1 Pair of Magnetic Lashes (Reusable)

1 Lash Setting Solution

1 Velvet Storage Ribbon

When you open the box, the lashes are already placed in the correct left and right positions, with L (left) and R (right) printed on the box. After removing the lashes, you’ll see a blue dot and a white dot on the lash band—blue is on top, white is on the bottom.

Yes. Under normal wind, sweat, or light rain, our magnetic lashes will stay securely in place. To extend their lifespan, we recommend avoiding prolonged water immersion (e.g., swimming).

No special remover is needed—gentle eye makeup remover works perfectly to remove magnetic eyeliner. When applied and removed correctly, they will not pull or damage your natural lashes.

If they feel uncomfortable, the lashes may be too close to your inner eye. Move them 1–2mm outward or trim the lash band for a better fit. Please note that issues caused by trimming are not covered under warranty.

he first time may require 1–2 practice tries, but you’ll quickly get the hang of it. We provide step-by-step guides and video tutorials so you can apply them in seconds—no glue, no waiting, no mess.

No, we do not recommend continued use if a magnet breaks. For quality issues, please provide an unboxing video to apply for warranty. Damage caused by misuse is not covered.